Graphite Diamond CBN Grinding Wheel , Mirror Polishing Resin Bond Grinding Wheel

High Performance Resin Bonded Graphite Grinding Wheel

For Mirror Polishing of Bearing and Metal Rollers Etc.

Model Type: TYC-GW-018

Brief Introduction of Graphite Grinding Wheel:

Mirror polishing grinding wheel, graphite grinding wheel, professional mirror polishing roller grinding wheel 

Graphite grinding wheel is made of organic polymer bond, which has good micro elasticity. Graphite is used as lubricating polishing agent to polish the surface of workpiece. The surface finish can reach ra0.01-0.02, old code is 13-14. According to the difference of fine allowance on the surface of workpiece, different grain size graphite grinding wheel can be made. The coarse grain graphite grinding wheel can meet the national standard of 600 #, and the allowance can be 0.5-1 wire on one side The national standard of 1200 #, graphite grinding wheel with grain size, is only used to polish and grind the workpiece, which has almost no effect on the size of the workpiece. It can be used for polishing and grinding with the size in place. Due to different workpiece materials and different grinding accuracy in the previous process, polishing wheels are required respectively. It is mainly used for ultra precision grinding, polishing and mirror grinding with small grinding allowance or size in place, and the finish can reach RA 04-0.01, this kind of grinding wheel has high surface finish and can achieve mirror effect.

Our company produces some special-shaped graphite grinding wheels, such as ordinary cylindrical grinding graphite grinding wheel, surface grinding graphite grinding wheel, graphite conductive grinding wheel, centerless grinding graphite grinding wheel, grinding roller graphite grinding wheel, cup-shaped graphite grinding wheel, etc., and provides technical services. We welcome all major manufacturers to come to test. 

Scope of application:

It is suitable for high mirror precision requirement of various roller and bearing workpieces.

Main features of CBN grinding wheel:

• High grinding efficiency

• High wear resistance: the wear resistance of the grinding wheel is high, and the abrasive consumption is small, especially when grinding hard and brittle workpiece.

• Low grinding force and low grinding temperature

• The workpiece has high precision, high finish and good shape retention

 Sketch  map of our CBN abrasive wheel

    D: out diameter

    H: inner diameter

    T:  thicknesss

    X:  abrasive area width

Specificaion of Our Graphite Grinding Wheel:

• Out Diameter: 150/200/250/400/500/600/1000 mm

• Inner Diameter: 20/32/75/127/203/305 mm

• Thickness:  15/20/25/40/50/60/75 mm

More Pictures of our CBN Grinding Wheel 

Precautions for use:

• Please check carefully before installing the cutting wheel. If there is any gap or other damage, please stop using it.

• When the cutting wheel is marked with the rotation direction, it should be consistent with the rotation direction of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to give full play to the performance of the cutting wheel.

• Please do not use the cutting wheel that does not meet the requirements.

• If any abnormality is found in the cutting process, stop the machine immediately and check the cause.

• When the cutting is not sharp, the grinding wheel should be trimmed. If it is used continuously, the grinding wheel may be damaged due to overheating and overload.

• When the grinding wheel rotates, it is strictly forbidden to cut by hand, let alone touch the sand by hand and body

• The cutting wheel is forbidden to be used in operations other than grooving or cutting, so as to avoid abnormal operation due to uneven stress.

Ordering instructions:

When you order for the first time, please provide the following parameters, so that we can help you choose the most suitable cutting wheel.

Specification and size: abrasive, particle size, binder, outer diameter, thickness, inner diameter, abrasive working layer width, substrate thickness, etc. purpose: workpiece name, cutting size, cutting material;

Service conditions of grooving and cutting: machine tool, grinding wheel speed, feed speed and cutting depth;

Dry and wet cutting requirements: cutting accuracy, chipping requirements, processing surface integrity, etc

Special requirements: whether the tool is assembled and used, whether the resin cutting wheel needs to conduct electricity, whether the outer circle of the cutting wheel has a water tank, the size and quantity of the water tank, whether there is a chip removal groove on the outer side of the cutting wheel base, etc.

Order Operating Procedure: